Shop

Ultra Prep – Surface Primer for Pipe Bond & Poly Bond Systems

Ultra Prep is a specialist surface primer and moisture scavenger formulated to improve the adhesion of Pipe Bond and Poly Bond repair systems. By removing surface moisture and light contaminants, Ultra Prep helps ensure that these two‑part compounds bond effectively to a clean, well‑prepared substrate, delivering stronger, more reliable repairs on pipes, joints, and other components.

The product is intended for use as part of a controlled surface preparation process. For best results, surfaces should be sanded down to remove corrosion, scale, and loose material, then cleaned of all dust and debris. Ultra Prep is then applied using gloves and a disposable cloth to wipe the substrate immediately before applying Pipe Bond or Poly Bond. This additional preparation step helps maximise bond strength and long‑term performance, particularly in damp or challenging environments.

As part of the Ultrabond range from MW Polymers Products Ltd, Ultra Prep is designed to complement your existing pipe and multi‑surface repair workflows, providing an extra level of assurance where adhesion and durability are critical.

Key Benefits

• Improves adhesion of Pipe Bond & Poly Bond – Enhances bond strength and reliability on prepared substrates.

• Moisture‑scavenging primer – Removes surface moisture that can interfere with adhesion of two‑part repair compounds.

• Optimises surface preparation – Works as part of a best‑practice prep routine to ensure clean, sound bonding surfaces.

• Simple to apply – Used with gloves and a disposable cloth to wipe the substrate immediately before repair.

• Supports durable repairs – Helps deliver long‑lasting performance in demanding pipe and industrial repair applications.

Typical Applications

Ultra Prep is used alongside Pipe Bond and Poly Bond for:

• Surface preparation prior to applying Pipe Bond on corroded or damaged metal pipes, joints, and valves

• Priming surfaces before using Poly Bond for multi‑material repairs on metal, brick, stone, wood, fibreglass, ceramics, and plastics

• Enhancing adhesion in damp or challenging environments where surface moisture may compromise bond quality

• General industrial and utility repair workflows where maximum bond strength and reliability are required

How to Use Ultra Prep

For best results, follow a structured surface preparation process:

1. Mechanical preparation – Sand down the surface to remove corrosion, scale, paint, and loose material.

2. Clean the surface – Remove all dust, dirt, grease, and debris; ensure the substrate is dry and sound.

3. Apply Ultra Prep – Wearing gloves, use a clean, disposable cloth to apply Ultra Prep to the substrate, wiping thoroughly to remove residual moisture and light contamination.

4. Apply repair compound – Once the surface has been treated with Ultra Prep, apply Pipe Bond or Poly Bond according to the product instructions.

Always refer to the relevant technical datasheets and application guidelines for Pipe Bond, Poly Bond, and Ultra Prep before use.

Technical & Compliance Information

Ultra Prep is part of the Ultrabond range from MW Polymers Products Ltd, designed as a surface preparation aid for use with Pipe Bond and Poly Bond systems.

For full technical data sheets, safety data sheets, and detailed application instructions, contact the Ultrabond technical team or submit an enquiry via the product form.